← Monolith Ventures — main page

Waste to Energy · Hybrid Power · Modular Turbines · Local Energy

Firm power,
behind the meter.

Biomass conversion, an operating hybrid plant, modular 9.75 MW gas turbines, and supply from local energy companies — generation where the load is, delivered over private 13.8 kV distribution, without waiting on an interconnection queue.

The platform starts with the Advanced Pyrolysis System (APS) — patented technology that cleanly converts Biomass waste streams into carbon, activated charcoal, synthetic gas and energy — and, in Colusa, California, into behind-the-meter power for AI compute.

Biomass Pyrolysis · Hybrid Power · Modular Gas Turbines · Local Energy Supply

A pile of wood-chip Biomass feedstock — chipped wood ready to be converted by the Advanced Pyrolysis System Innovating Sustainable Power

Advanced Pyrolysis System — Biomass in, carbon and energy out

What We Do

Turning Biomass waste into energy.

SVEG — Silicon Valley Energy Global, LLC specializes in turning Biomass waste into energy through a process called pyrolysis.

At the center is the Advanced Pyrolysis System (APS) — a patented waste-to-energy technology, developed and tested over more than 15 years in the US. Heated in a controlled, oxygen-limited environment, Biomass feedstock breaks down cleanly instead of burning.

The result is a set of useful outputs: carbon char — including activated charcoal grades for industrial applications — synthetic gas, and energy. Waste streams become inputs; inputs become products.

Carbon CharSolid carbon from Biomass — including activated charcoal for industrial use.
Synthetic GasGas released by pyrolysis, captured as a usable energy stream.
Energy OutPower from waste — in Colusa, delivered behind the meter to the campus.
A Biomass pyrolysis plant with a large rotary reactor, conveyors feeding wood Biomass, storage tanks and a pile of black carbon char
Feedstock — wood and agricultural Biomass, stockpiled and ready for conversion.

APS Technology

One system. Many feedstocks.

The Advanced Pyrolysis System is a patented waste-to-energy (WTE) technology, developed and tested over more than 15 years in the US — built to take a wide variety of feedstock materials and cleanly convert them to carbon char and synthetic gas.

Feedstock in

Biomass and waste materials — from wood and agricultural byproducts to municipal, medical and other streams — are prepared and fed into the system.

Pyrolysis conversion

Inside the APS, heat breaks the material down without open burning — a clean conversion rather than incineration.

Carbon, gas & energy out

The system yields carbon char and synthetic gas — carbon and activated charcoal for industrial applications, and gas and energy streams put to work.

Feedstocks the APS can convert

A wide range of materials can be cleanly converted to carbon char and synthetic gas — including, but not limited to, the streams listed here.

  • Municipal Solid Waste (MSW)
  • Agricultural Waste
  • Medical Waste
  • Wood
  • Tires
  • Sludge
  • Other Biomass & Waste Materials

Explore

Go deeper.

The technology, the story on screen, and the information investors ask for — the three doors into SVEG.

01

APS Technology

Our Advanced Pyrolysis System (APS) is a patented waste-to-energy technology, developed and tested over a period of more than 15 years in the US — converting Biomass feedstock into carbon char and synthetic gas.

How the APS works →
02

Videos

Watch informative, engaging content on Biomass energy production, conversion processes, environmental solutions, and real-world applications of the APS waste conversion technology.

See the process →
03

Investors Corner

Information to help investors better understand who we are and what we do — the benefits of the technology, process information, company information, and FAQs.

Start with contact →

Carson, California

Carson Hybrid Energy.

A fully permitted, operating power plant in Carson, California — built as a combined-cycle co-generation facility, and positioned today as a behind-the-meter hybrid energy host for a tethered load such as a data center.

The Carson plant is a 48 MW combined-cycle power plant — a GE LM6000PC aeroderivative gas turbine paired with a steam turbine — fully permitted and operating.

It has been in operation since 1989 as a PURPA co-generation qualifying facility. The plant was built for 24/7 baseload power; since 2013 it has run as a peaker plant, a mode that has preserved the asset — the turbine has been rebuilt to zero-hour and the plant carries low run hours.

Under PURPA, that history matters for what comes next: the plant can deliver both electricity and thermal energy directly to a tethered host behind the meter — with utility backup power available if the plant trips, so the host load stays served.

Aerial view of the Carson Hybrid Energy combined-cycle power plant in Carson, California, showing the main turbine hall, cooling and steam equipment, and surrounding industrial buildings
Carson Hybrid Energy — the operating 48 MW combined-cycle plant in Carson, California.
48 MWOperating combined-cycle capacity, fully permitted
68 MWTotal capacity with the approved +20 MW expansion
1989In operation since — as a PURPA co-generation qualifying facility
24/7 · 365Standby, ready-to-run operation, every day of the year

Behind-the-meter tethering

Under PURPA, the plant can tether directly to a host such as a data center, delivering electricity and thermal energy behind the meter — with utility backup power if the plant trips.

Thermal energy & cooling

Excess steam from co-generation is available to the host — about 470 tons of cooling today via absorption chillers, expandable to ~824 tons.

Battery storage

A 1 MW / 3 MWh zinc-bromide battery energy storage system is being installed behind the meter — bringing black-start capability (self-start during a grid blackout) and lower demand charges.

Approved expansion

An approved +20 MW expansion, to 68 MW total: 7 MW of LM6000 wet compression, a 9.5 MW LM1500 simple-cycle gas turbine approved for construction, and 3.5 MW of additional battery storage.

Markets served

The plant sells electricity into the CAISO wholesale market and provides Resource Adequacy capacity — operating generation that participates in California's grid markets today.

Licensed & compliant

Licensed and in good standing with 22 local, state and federal agencies — including FERC, CAISO and SCAQMD — and held standby, ready to run 24/7, 365 days a year.

Modular Turbine Capacity

The J79Aero1500 — Carson’s expansion engine, as a modular plant

Carson’s approved +20 MW expansion includes a 9.5 MW LM1500 simple-cycle gas turbine. The J79Aero1500 belongs to that same LM1500 family — the vendor’s own overview documents the unit’s performance against the GE LM1500 performance curve — packaged as a factory-built, modular 9.75 MW plant.

That makes the J79Aero1500 more than an expansion unit: the same engine class that grows Carson can be deployed as modular capacity at other sites — assembled on a single pad, behind the meter, where the load is.

9.75 MWOutput at ISO conditions with inlet fogging — 8.5 MW without fogging
13,800 VGenerator output — 10 MW generator at 60 Hz, driven through a Lufkin speed-reduction gearbox
85 dBaAt 50 ft — sound-reducing, weather-resistant package enclosures
SCR + CEMSSelective catalytic reduction for NOx and CO control, with continuous emissions monitoring

Five factory-built packages, one pad

Turbine packageThe J79Aero1500 engine and power turbine, fully assembled in a sound-reducing enclosure with gas and fire detection and suppression.
Generator package10 MW, 13,800 V generator with Lufkin gearbox, SEL-700G generator protection and Basler digital excitation control.
Auxiliary packageAn electrical and controls room plus the self-contained lube oil skid — the plant’s control center and support systems in one module.
Inlet assemblyFilter house and air intake plenum delivering clean, filtered air to the compressor — with an optional inlet fogging system.
Exhaust systemTransition section and stack with integrated SCR for NOx and CO control, and a CEMS that monitors and verifies emissions.

Built to run

PLC / HMI monitoring

An integrated Phoenix Contact PLC-based control system and HMI provide centralized monitoring, control and diagnostics — vibration, bearing and lube oil temperatures, exhaust temperatures, emissions and electrical status — with remote-mirror HMI available at a customer-designated location.

40,000-hour overhaul interval

Time between major overhauls is typically 40,000 hours firing natural gas, with combustor cans replaceable in the field at 10,000 hours.

Backup-engine program

A serviceable backup engine is held available to minimize downtime if a component fails — a change-out takes about 16 hours after cool-down, accomplished with routine hand tools.

First seven units

The subassemblies are modularized for quick installation and ready for assembly; shipment of the first seven units is estimated at 9–12 months after order.

Modular turbine capacity for data centers and industrial hosts — behind the meter, on your site, on your timeline.

Talk to us about capacity →

Inside the Plant

The LM6000PC gas turbine

At the heart of Carson is a General Electric LM6000PC aeroderivative gas turbine — a power-plant engine derived from aviation, chosen for the combination a hybrid host needs most: high efficiency, fast response, and a long remaining service life. Here is how the plant is configured, and what the machine can do.

How Carson is configured

The LM6000PC prime mover drives an Electric Machinery brushless synchronous generator rated 47,765 kVA. Exhaust heat is recovered on the steam side by a Shin Nippon steam turbine rated 10,500 kW, coupled to a 10,500 kW Shinko brushless generator.

Together, gas turbine + steam cycle produce 48 MW combined at full power — matching the plant’s CPUC Net Qualifying Capacity (NQC) of 48 MW.

A rebuilt, low-hour asset

The LM6000PC was installed in 2003 as an upgrade from the plant’s original LM5000. In 2013, GE’s Houston depot rebuilt it to zero-hour — as-new — condition.

Since then it has accumulated only ~17,000 operating hours on a machine capable of 100,000 hours — most of its service life remains. Peaker duty explains the number: under 600 hrs/yr in recent years, against 8,760 hrs/yr for baseload. The asset was conserved, not worn out.

~45 MWLM6000PC simple-cycle rating (GE Vernova family data)
48 MWCombined-cycle output at Carson — and its CPUC Net Qualifying Capacity
47,765 kVAElectric Machinery brushless synchronous generator driven by the turbine
10,500 kWShin Nippon steam turbine + Shinko generator on the steam side
8,549 Btu/kWhHeat rate — among the most fuel-efficient simple-cycle turbines in its class
>40% / >56%Efficiency — simple cycle / combined-cycle configurations
~10 minTo full power from start — about 5 minutes on fast-start variants
~17,000 hrsRun since the 2013 zero-hour rebuild — on a 100,000-hour-capable machine

Aeroderivative by design

The LM6000 family is derived from the CF6-80C2 aircraft engine — the widebody airliner engine family. Its two-shaft aeroderivative design brings aviation-grade engineering to the plant floor: built for fast, flexible, reliable power, in a compact package that is straightforward to service and swap.

Fast start, fast ramping

The turbine reaches full power in about 10 minutes and ramps in the ~50 MW/min class. That flexibility suits it to peaking, dispatch and load-following — following a host’s demand as it moves — as well as sustained baseload running when called on.

Combined cycle & co-generation steam

Running in combined cycle lifts efficiency above 56%, and co-generation puts the steam to work twice: 8,964 lb/hour of excess steam is available to a tethered host — about 470 tons of cooling via absorption chillers at minimal operating cost — expandable to 15,660 lb/hour / ~824 tons.

Emissions control

The PC model uses a water-injected single annular combustor for NOx control — water injection in the combustion process suppresses the temperatures at which nitrogen oxides form, helping the plant meet California’s strict air-quality requirements.

Long service intervals

The PC is built for long runs between interventions: roughly 16,000-hour hot-section intervals and ~48,000-hour major overhaul intervals. Combined with Carson’s low post-rebuild hours, that means long stretches of available operation before major work is due.

Room to grow

Wet compression adds 7 MW to the LM6000 — power augmentation that forms part of Carson’s approved +20 MW expansion to 68 MW. The turbine at the center of the plant has a permitted path to more output on the same site.

Fuel: the plant runs on natural gas supplied under contract, fed by a dedicated 6-inch SoCalGas main at ~450 psi. Sources: Carson configuration, hours, steam and expansion figures are from the plant’s own overview; LM6000 family ratings, efficiency, start and service-interval figures are GE Vernova’s published data for the LM6000 / LM6000PC.

Capabilities

What SVEG can provide.

Operating generation, Biomass waste-to-energy, modular gas turbines, local energy supply, storage and thermal energy — combined behind the meter, permitted, and run as one hybrid energy platform.

Behind-the-meter hybrid power

Operating generation tethered directly to your facility — electricity delivered behind the meter, with utility backup, instead of relying on the grid alone.

Modular gas turbine capacity

Factory-built J79Aero1500 modular gas turbine plants — 9.75 MW per unit at 13,800 V, assembled from five packages on a single pad — firm capacity deployed where the load is, behind the meter.

Biomass waste-to-energy

Patented APS pyrolysis converting Biomass feedstock — wood, agricultural byproducts and other waste streams — into energy, carbon char and synthetic gas.

Battery energy storage

Behind-the-meter battery storage for black start, demand management and resilience — self-starting through a grid blackout and smoothing the load the grid sees.

Thermal energy & cooling

Co-generation steam put to work for the host — excess thermal energy driving absorption cooling, so one plant serves both the power and cooling load.

Permitted capacity growth

Approved expansion pathways at operating plants — added generation and storage layered onto an already-permitted, already-running site.

Market participation

Wholesale electricity and Resource Adequacy capacity — generation that can serve a tethered host and participate in California's CAISO markets.

Local energy supply

Power sourced from local energy companies, contracted to serve the load directly — supply that complements on-site generation and keeps capacity close to where it is used.

Fully licensed operations

Permitting and agency compliance handled end to end — licensed and in good standing across local, state and federal agencies, with plants held standby and ready to run around the clock.

Colusa, California

Where Biomass meets compute.

In Colusa, California, this Biomass technology does double duty. The campus pairs Biomass conversion with behind-the-meter power for Monolith Titan's AI data halls — the Biomass plant sits on site, and its power serves the campus load directly.

It is the group's clearest expression of waste to energy: Biomass in, green power out — behind the meter, where the compute actually runs.

  • AI Green · Biomass BTM — the Colusa campus runs on Biomass behind-the-meter power
  • On-site Biomass plant at the Niagara Ave campus in Colusa
  • City of Colusa BTM PPA framework — power contracted to serve the campus load directly

Monolith Titan Data Centers

AI Green in Colusa.
Powered by Biomass.

The Colusa campus is the anchor of Monolith Titan Data Centers — high-density AI halls powered behind the meter by the on-site Biomass plant.

Visit Monolith Titan Data Centers →

Contact

Silicon Valley Energy Global, LLC

SVEG · Innovating Sustainable Power

Address 2861 Niagara Avenue
Colusa, CA 95932

SVEG — Silicon Valley Energy Global

Biomass in.
Carbon, gas & energy out.

Patented Advanced Pyrolysis Systems turning Biomass waste into carbon, activated charcoal, synthetic gas and energy — and powering the AI Green Biomass BTM campus in Colusa. That is SVEG — Silicon Valley Energy Global, LLC, part of the Monolith Ventures group.